New key programming success!! Today, our engineer managed to program a new key of 2015 Ford Focus with Magic Wand transponder, Quickly & OBDSTAR X100 key programmer.
Model:
2015 Ford Focus
Tools used:
The original key and new key
Procedure:
Step 1- Test the original transponder key by Quickly transponder
Put the original key into the slot in Quickly
Select Read or copy
Wait and don’t remove the key
The chip is 83
Take the key and try to use it start the car
It’s working
Then take out the key
Step 2- Test the new transponder key
(the sane as how to test the original one above)
The chip is 4D 70
Try to start the car by the new key
It doesn’t work
Step 3- Format 4D 70 to 83 by MAGIC WAND transponder
Put the new key into the key reading & writing slot
Press “8” “3” and “write” buttons, and green indicator displays
Take the key away
Step 4- Program the new key via OBDSTAR X100 key programmer
(x300 is connected and starts in preparation)
select Ford-> Focus-> year: 2014-
Select “programming a new key”
Insert a new transponder key and switch ignition on
Magic Wand close to ignition
X300 is reading pin code…
Switch ignition off
Switch ignition on
We own 3 keys to start this car
Programming…
Key information
It will take 4 minutes to program…
Get the pin code
Now, we own 4 key to start this car
Try to start the car by the new key
It’s working
Ford Focus 2015 new key programming success!
