Yanhua Mini ACDP Ford DPS6 Gearbox Clone Guide:
The Device Need:
2.OBDP+ICP
3.20 Pin Cable
4.Ford DPS6 Interface Board (Yanhua Module 26)
Yanhua ACDP Module26 Support 6-speed dual-clutch gearbox clone for Ford Focus, Ecosport, Fiesta, Aspire, Figo, etc.
Connection:
Install the interface board, short the jumper cap on the OBP+ICP adapter to the “CAN-R” JOIN side.
After connection, Open the ACDP APP.
Choose Ford – Gearbox Clone – DPS6 (Please Note that you will not get the online help from the technician friend when operating if you didn’t login to the technician group)
Step 1: Connect the system and Chip Reading ( Please connect ACDP with gearbox, and ensure the stable network connection and Do Not pull out the device during it working)
Step 2: Read/Write Data – Full Backup Data, Save the File
Step 3: Disconnect
After Disconnect Finishing: Connect the new DSP6 gearbox computer and prepare to write the original data.
The Connect Again
Then Read/Write data – Full Write Data, choose the original data file that saved in the previous step.
After Write Chip data, return the previous page – Disconnect.
Disconnect Fisnished,Ford DPS6 Gearbox Computer Cloning Done.
Video Gudie:
Source: https://blog.uobdii.com/yanhua-mini-acdp-ford-dps6-gearbox-clone-with-module26/
